DennysDriveshaft.com
Free Shipping on Orders Over $99.00

Product Search
Denny's Driveshaft builds custom steel and aluminum driveshafts for your high performance car, street rod, race car, van, pick up or 4x4 truck
 
DANA SPICER 2-2-1949 Flange Yoke 1310 Series fits front diff pinion flange 2007 to 2015 Jeep JK
Part Number:
2-2-1949


UPC:
023913231682
Your Cost $31.95
STATUS:  IN STOCK

DANA SPICER 2-2-1949

  • Flange Yoke
  • 1310 Series
  • Fits front diff pinion flange Jeep JK
    • 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

Use this 1310 series flange yoke to mount a 1310 series universal joint driveshaft into OEM stock front diff pinion flange that was originally designed for the ball style high speed CV joint.

Mounts directly to stock OEM front diff companion flange

  • You will also need Dana Spicer 10016921 double cardan CV yoke to mount a 1310 series double cardan CV driveshaft at the transfer case end.
  • With part numbers 2-2-1949 and 10016921 you can install a normal 1310 series double cardan CV driveshaft into your 2007 to 2015 Jeep JK
  • Maximum suspension lift to use these parts is no more than 4 inches.


 

Spicer
DANA SPICER 2-2-1949 Flange Yoke 1310 Series fits front diff pinion flange 2007 to 2015 Jeep JK
DANA SPICER 2-2-1949 Flange Yoke 1310 Series fits front diff pinion flange 2007 to 2015 Jeep JK
FOR FASTER SERVICE, PLEASE ORDER ALL PARTS ONLINE
STATUS:  IN STOCK
YOUR COST:  $31.95

DANA SPICER 2-2-1949

  • Flange Yoke
  • 1310 Series
  • Fits front diff pinion flange Jeep JK
    • 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

Use this 1310 series flange yoke to mount a 1310 series universal joint driveshaft into OEM stock front diff pinion flange that was originally designed for the ball style high speed CV joint.

Mounts directly to stock OEM front diff companion flange

  • You will also need Dana Spicer 10016921 double cardan CV yoke to mount a 1310 series double cardan CV driveshaft at the transfer case end.
  • With part numbers 2-2-1949 and 10016921 you can install a normal 1310 series double cardan CV driveshaft into your 2007 to 2015 Jeep JK
  • Maximum suspension lift to use these parts is no more than 4 inches.

DIMENSIONS

  • A - Flange or Swing Diameter = 4.719 inches
  • B - Bolt Circle Diameter = 3.750 inches
    • Bolt Hole Diameter = 0.481 inches
    • Bolt Holes = 4
    • Bolt Holes = DRILLED
  • C - Center Pilot Hole Diameter = 2.558 inches
    • Center Pilot = MALE
  • Series = 1310
    • Outside Snap Ring Style
    • U-Joint Width between snap rings = 3.219 inches
    • D - U-Joint Bearing cap diameter = 1.062 inches
  • G - Center of u-joint bore to Face of flange = 1.781 inches
  • X - 2.625 inches
  • Y - 2.625 inches
  • Special Notes: 12 MM BOLT HOLES EQUALLY SPACED

 

 

Denny's Driveshafts Flange Yoke Dimension Diagram

DANA SPICER 2-2-1949 Flange Yoke 1310 Series fits front diff pinion flange 2007 to 2015 Jeep JK

DANA SPICER 2-2-1949 Flange Yoke 1310 Series fits front diff pinion flange 2007 to 2015 Jeep JK

Enter your email address and we'll send you a message when this item is available

Please enter your email address in order to be notified when this item is available.
DennysDriveshaft.com - © Copyright 2024-Present

Website and Web Hosting by Online Media
Online Media - Buffalo's Web Hosting Company