Dana Spicer 3-53-2281 MIDSHIP SPLINE Fits 3.5 inch .083 wall tube 1.500 inch Diameter with 15/16 Splines

Part Number:
3-53-2281

UPC:

023913230128

Your Cost ~~$131.20~~ Sale Price $109.88

You Save $21.32

STATUS: IN STOCK

DANA SPICER 3-53-2281

Dana Spicer 3-53-2281 MIDSHIP SPLINE Fits 3.5 inch .083 wall tubing 1.500 inch Diameter with 15/16 Splines

FOR FASTER SERVICE, PLEASE ORDER ALL PARTS ONLINE

STATUS: IN STOCK

YOUR COST: ~~$131.20~~ Sale Price $109.88

You Save $21.32

DANA SPICER 3-53-2281

MIDSHIP SPLINE
Use with Center Support Bearing
Fits any series 15 based on 16 Spline SLIP YOKE designed for 1.500 inch diameter spline
- Fits TUBE DIAMETER = 3.5 inch OUTSIDE TUBE Diameter
- Fits TUBE WALL THICKNESS = .083 inch Tube wall thickness
- Major SPLINE Diameter = 1.500
- SPLINES = 15/16
- STYLE = 2
- B = 1.810
- C = 1.575
- G = .875
- K = 10.719
- L = 3.000
- Y = 9.625
SPECIAL NOTES:
- Blue GLIDECOAT on Spline for smooth operation and long life (DO NOT REMOVE this coating)
- May use boot 211916X or dust cap 211158X, order separate

Dana Spicer 3-53-2281 MIDSHIP SPLINE Fits 3.5 inch .083 wall tubing 1.500 inch Diameter with 15/16 Splines

You May Also Need These Parts to Complete the Job

Dana Spicer 211158X PRESS ON Seal with grease fitting fits SPICER slip yoke designed for press on style seal with 1 1/2 inch diameter spline Part#: 211158X $13.95	DANA SPICER 211916X Rubber Dust Boot 1.140 ID x 1.670 ID x 4.070 inches long 3 Bellows for spline and slip yoke style driveshaft fits 1210, 1310 and 1330 series Part#: 211916X $15.76
Dana Spicer 211359X Center Support Bearing with 1.574 ID fits 2WD and 4WD Ford E100, E150, E250, E350 and F150, F250, F350 from 1975 to 2018 with 1-1/2 inch diameter spline Part#: 211359X $53.95	Dana Spicer 211499X Center Support Bearing with 1.574 ID fits 2WD and 4WD Ford E100, E150, E250, E350 and F150, F250, F350 from 1995 to 2004 with 1-1/2 inch diameter spline Part#: 211499X $63.34
Dana Spicer 211963-1X Center Support Bearing M10x1.5 metric threaded bolt holes 1.574 ID fits 1998 to 2002 Dodge Ram 2500, 3500 Part#: 211963-1X ~~$79.25~~ $69.37	Dana Spicer 211848-1X Center Support Bearing .437-14 threaded bolt holes 1.574 ID fits Dodge B150, B1500, B250, B350, B3500, Ram 1500, 2500, 3500 and 1500, 2500, 3500 VAN Part#: 211848-1X ~~$92.54~~ $77.51

Please enter your email address in order to be notified when this item is available.

Driveshaft and Driveline Parts > SPLINES...Center Bearing style using a SLIP YOKE > 1.5 inch - 15 BASED on 16 SPLINES > Use with 3.5 INCH .083 wall TUBING